If you ride a Harley-Davidson or Indian bagger, you already know the struggle: you pull into a stop—fuel, lunch, hotel, rally—and suddenly you’re doing the “helmet shuffle.” Seat, mirror, handlebar, highway peg… and every one of those options comes with the same two risks: damage and theft.

That’s exactly why we brought the Helmet HanGr into the Law Abiding Biker Store—because it’s one of those rare, simple products that makes you wonder: how was this never a thing until now? (see video below)

The Everyday Helmet Problems Bagger Riders Deal With

Most of us have done at least one of these “temporary” helmet placements when parked:

• On the seat: it’s only a matter of time before it slides, gets bumped, and hits the ground.
• On the mirror: can slip off, can throw off your mirror adjustment, and it’s not secure.
• On the highway peg: easy to knock off, and if it rains, water runs right into your helmet.
• On the handlebar: also easy to knock off, plus rain goes right inside.
• In the saddlebag or tour pack: sounds nice… until reality hits. Most of the time your tour pack is already full, and a full-face helmet isn’t fitting in saddlebags.

SUPPORT US AND SHOP IN THE OFFICIAL LAW ABIDING BIKER STORE

Your helmet is often your most valuable piece of riding equipment, so it makes sense to protect it.

The Solution: Schmid Moto Helmet Saddlebag/Tourpack/Trunk Hanger (HangR) Hook

In our store, the official listing name is:

Schmid Moto Helmet Saddlebag/Tourpack/Trunk Hanger (HangR) Hook

This is a sleek, purpose-built hanger designed to give bagger riders a stable, secure place to hang a helmet when parked, with an added feature that takes it to the next level: locking capability.

Built Like It Should Be: Materials, Protection, and USA Craftsmanship

One of the first things you’ll notice is how solid it is:

• 14 gauge carbon steel
• Made in the USA (we love American-made products—especially ones built by riders)
• Comes in a nice plastic tube for storage in your saddlebag/tour pack when not in use
• Includes a thick protective pad so it won’t scratch your paint

This is exactly the kind of gear we like: simple, rugged, and clearly well thought out.

Where You Can Use the Helmet HanGr on Your Bagger

This is what makes it so valuable—it’s universal for bagger-style setups (Harley, Indian, Gold Wing, and more).

Saddlebag mounting

• Hang it from the saddlebag area when parked
• If you run saddlebag-mounted lights, you can position the HanGr to the side so everything clears properly
• Your bag can still close and lock normally

Tour pack / trunk mounting

• Hang it from the side or slide it around to the back
• Your trunk lid can still close and lock for security

CHECK OUT OUR HUNDREDS OF FREE HELPFUL VIDEOS ON OUR YOUTUBE CHANNEL AND SUBSCRIBE!

The Killer Feature: Lock Your Helmet to the Bike

Here’s what separates the Helmet HanGr from “just another hook”:

There’s a 3/8” hole in the end of the HanGr so you can run a helmet cable lock through it and secure your helmet to your bike.

That means:

• You’ve got a proper place to hang the helmet
• And you can lock it up for peace of mind at lunch stops, unfamiliar areas, hotels, rallies—anywhere you don’t want to carry it in

Helmet Locks That Pair Perfectly (Available in the Law Abiding Biker Store)

In the Law Abiding Biker Store, we carry helmet lock options that “seal the deal” with this setup—easy-to-use 3-foot combination cable locks that are long enough to route around a solid part of the helmet (like the chin bar), then through the HanGr’s lock hole.

This pairing is exactly what we used and tested in real-world travel situations—including busy stops where you want to walk away from the bike without worrying.

Small Enough to Carry Everywhere (No Saddlebag Space Wasted)

Worried it’ll eat up room? Don’t be.

The Helmet HanGr is small, and you can toss it in a saddlebag or trunk easily—either by itself or inside the included tube.

Important Safety Note

Warning: The Helmet HanGr is not intended for use while the vehicle is in motion. It’s a parked-bike solution—exactly when you need helmet storage and security.

Beware of Knockoffs and Lookalikes (Amazon / eBay)

This is important.

There are cheap knockoffs floating around online (Amazon/eBay). They are not made in the USA, and they’re not built to this quality.

When you buy it from the Law Abiding Biker Store, you know:

• You’re getting the correct Helmet HanGr
• It’s quality
• And it’s the exact product we use and test ourselves

LISTEN TO THE LAW ABIDING BIKER PODCAST!

Get the Helmet HanGr in the Law Abiding Biker Store

Everything we mention in our content is available through the Law Abiding Biker Store—because we’re a bootstrap company of bikers helping bikers. We’re not a big conglomerate store. We actually use, test, and make videos on what we sell.

And don’t forget the savings:

• Free shipping on orders over $100
• No tax if you live outside Washington State

Grab yours here in our store: Schmid Moto Helmet Saddlebag/Tourpack/Trunk Hanger (HangR) Hook
(And pair it with one of our combination helmet cable locks for the complete setup.)

Watch the Full Detailed Video Review

If you want to see exactly how it mounts on the saddlebag and trunk, how it clears accessories, and how we lock the helmet to the bike step-by-step…