Video-Install Aftermarket Handlebars on a Harley Davidson Touring Motorcycle | Complete Guide & Instructions

[vc_row][vc_column css=”.vc_custom_1416445359866{padding-top: 20px !important;padding-right: 20px !important;padding-bottom: 20px !important;padding-left: 20px !important;background-color: #595959 !important;}”][vc_column_text]

Save money now! Install aftermarket handlebars on your Harley Davidson yourself!
Fact: Dealerships can charge $1,000 and up for this project
Do it in your garage or on your patio right on the kickstand!
Trick your Harley out the way you want it!
No special motorcycle lifts or jacks needed!
Have the pure satisfaction of working on your own Harley!

A Video by Bikers for Bikers!

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_cta_button call_text=”Pick the Handlebar Install Video That's Right For You! Check our Handlebar Video Page Here.” title=”HANDLEBAR INSTALL VIDEO PAGE!” target=”_blank” color=”btn-primary” icon=”wpb_play” size=”btn-large” href=”https://www.lawabidingbiker.com/harleyhandlebars”][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”7261″ img_size=”full” alignment=”center”][vc_column_text]This tutorial video will work for any similar models of Harley Davidson Motorcycles. We used a Harley Touring for this project.[/vc_column_text][vc_toggle title=”Basic Tools & Items Needed” style=”round_outline” color=”blue” size=”lg” el_id=”1430423983617-fcc6e82b-ca04″]

Tools & items needed: (affiliate links)

Screwdrivers (standard & phillips)
Torx head wrenches (standard sizes)
Standard box end wrenches (American & Metric)
Wire strippers (a pocked knife could be used instead)
Pliers (standard & needle nose)
Butane mini torch or just a standard lighter
Allen/Hex head wrenches (American)
Transmission oil (one quart)(replacement if you have to put extended clutch cable or hydraulic clutch lines on)
DOT 4 brake fluid (if replacing with extended brake lines)(for bleeding lines)
Transmission cover gasket (If you have to put extended clutch cable or hydraulic lines on)
A simple hand operated brake line bleeder vacuum pump
Basic 40W soldering iron kit
Solder

[/vc_toggle][vc_toggle title=”Handlebar kit & bars we used” style=”round_outline” color=”blue” size=”lg” el_id=”1430423983686-ee716d01-5e07″]

Burly Handlebar Cable Installation Kit For Harley
Cycle Smith 13″ Apes

You absolutely do not have to use the same kit or bars we used in the tutorial video. They all wire and go on the same way. Please consider using the below affiliate links to purchase your bars and install kit.

Revzilla | Amazon | Cruiser Customizing | Cycle Parts

[/vc_toggle][/vc_column][vc_column width=”1/2″][vc_column_text]

An easy to follow step-by-step tutorial video.

[/vc_column_text][vc_btn title=”I WANT THIS NOW!” color=”green” size=”lg” align=”left” link=”url:https%3A%2F%2Fgumroad.com%2Fl%2Fharleytouringhandlebars||target:%20_blank”][vc_single_image image=”6239″ img_size=”medium” alignment=”center” title=”GUARANTEE YOU CAN DO THIS!”][/vc_column][/vc_row][vc_row bg_type=”no_bg”][vc_column width=”1/2″][vc_single_image image=”7256″ img_size=”medium” alignment=”center” img_link_large=”yes” title=”Stock Harley Touring Handlebars (Before)”][/vc_column][vc_column width=”1/2″][vc_single_image image=”7257″ img_size=”medium” alignment=”center” img_link_large=”yes” title=”13 inch Aftermarket Handlebars (After)”][/vc_column][/vc_row][vc_row bg_type=”no_bg”][vc_column][vc_column_text]

Purchase handlebars & wire/cable kits through our affiliates!

Revzilla | Amazon | J&P Cyles

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_video link=”https://youtu.be/BQDABiHUIGQ”][/vc_column][/vc_row][vc_row bg_type=”no_bg”][vc_column][vc_cta_button call_text=”See Other Useful For Purchase Videos” title=”CHECK THEM OUT!” target=”_blank” color=”btn-primary” icon=”wpb_play” size=”btn-large” href=”https://www.lawabidingbiker.com/buyvideos”][/vc_column][/vc_row][vc_row][vc_column][vc_cta_button call_text=”See Other Useful Free Videos” title=”CHECK THEM OUT!” target=”_blank” color=”btn-primary” icon=”wpb_play” size=”btn-large” href=”https://www.lawabidingbiker.com/freevideos”][/vc_column][/vc_row][vc_row][vc_column css=”.vc_custom_1416633972953{background-position: center !important;background-repeat: no-repeat !important;background-size: cover !important;}”][vc_column_text]

A Video by Biker for Bikers

Fact: Dealerships and mechanics can charge over $1,000 to put aftermarket handlebars on your Harley Davidson motorcycle. It is often times well over that amount, yet we know you can do this project yourself by watching this tutorial video. We teach you everything you will need to know and walk you through the entire process.

In this tutorial video we install 13″ aftermarket handlebars & on a Harley Davidson touring motorcycle. We complete an install on both a Harley Street Glide and Road Glide. We wired the new bars internally on both for that clean look. This #1 rated tutorial video will not only work for Harley Davidson touring models, but for an array of different, yet similar Harley models.

Check out our Handlebar Install Video Page and pick the right video to suite your project.

You will not find a more thorough aftermarket handlebar install tutorial video out there. It is a video by bikers for bikers. You can put new handlebars on your Harley right in your garage or on your patio right on the kickstand! There are no specialty tools or motorcycle lifts required and I will give you a list of items you will need and things to think about later in this article.

Purchase it now and stream it immediately just like a YouTube video as many times as you like!
FYI: Here is just one an example of one of our many completely Free tutorial videos, so you can bet our for purchase videos are that and more. Click here to see that detail in that video. And while you are there subscribe to our YouTube channel.

The video is high definition and it is if you can reach out and turn the wrenches with us. In this video we skip no steps and we have no doubt that after watching you can do this project with ease. Tons of bikers all over the world now have aftermarket handlebars on their Harley's because of this exact video. We are very detailed in our explanations and we want you to be successful. That is where we get our greatest satisfaction.

There are many aftermarket handlebars for your Harley Davidson motorcycle in every shape, color, and size imaginable and the cost can vary just as much. There are many companies making quick connect/install kits. Most of these simple kits are the same and come with a bundle of colored wires for extending wire harnesses, quick connectors, and shrink tube. If you are going with taller style handlebars then the kit may also include an extended clutch cable and extended front brake lines.

Note: If you wan't to put heated grips on your Harley Davidson then now is the time, because you will be right there with everything apart. We can help you complete that too with our Harley Davidson Heated Grips Install Video.

Many of these handlebar wiring kits have quick connect pins for extending the stock wire harnesses. You usually take off the stock plastic harley wire plugs, extend the wires with the quick kit colored wires, and then plug back into the stock plugs all without soldering. You can always snip the quick connectors that come with the wire kits and solder if you are more comfortable with that.

There are also kits with the OEM plugs on the end of the wire extensions to quickly hook up after soldering extensions in. Either way, we have you covered in this video. We filmed several different kits and show you how to proceed depending on your particular kit, which aren't much different.

We can tell you from experience that you will want to have a soldering iron and solder on hand. Often times because of bulky plugs it may be necessary to solder a bit to make things clean and easy. Your extension kit may require soldering. Don't worry, we make soldering so easy and show you exactly how to do it properly in this video.

Most the time you can go as tall as 12″ aftermarket handlebars without having to replace wires, cables, and lines. I said, “most the time”, so you need to do your own research for your particular year and model before you begin your project.

Tools & items needed: (affiliate links)

Screwdrivers (standard & phillips)
Torx head wrenches (standard sizes)
Standard box end wrenches (American & Metric)
Wire strippers (a pocked knife could be used instead)
Pliers (standard & needle nose)
Butane mini torch or just a standard lighter
Allen/Hex head wrenches (American)
Transmission oil (one quart)(replacement if you have to put extended clutch cable or hydraulic clutch lines on)
DOT 4 brake fluid (if replacing with extended brake lines)(for bleeding lines)
Transmission cover gasket (If you have to put extended clutch cable or hydraulic lines on)
A simple hand operated brake line bleeder vacuum pump
Basic 40W soldering iron kit
Solder

As you can see, you don't need that much and can do this project right on the kickstand. So what are you waiting for? Don't waste your money taking your Harley to a mechanic and spend over $1,000 for this project. Get the tutorial video now and get started! Have the satisfaction of working on your Harley and completing your own projects.[/vc_column_text][/vc_column][/vc_row]

*Exclusive Access & Benefits! Become a Patron!