We are installing 12″ Westcoast MX T-bars on a 2016 Harley Dyna Low Rider S. We have the bike on the lift in the Law Abiding Biker™ Garage. Lurch and I broke the Harley down this weekend and filmed it as usual.
-
GET OUR HARLEY HANDLEBAR INSTALL VIDEOS HERE
- No need to pay a dealership to do this for you
There is not much information out right now in catalogs and online on the Dyna Low Rider S, as it was a special production bike. So, we broke it down and measured the stock clutch cable and front upper brake line. We figured out how much over stock length we'd need to go to accommodate these 12″ T-bars.
Armed with proper cable/line lengths, we ordered up what we'd need and had the shipping expedited, so we can put the bike back together next weekend. After we film putting the bike back together, we'll get the video into edit and hopefully release it to the biker community soon! You can check here for the handlebar install video.
Check out the Official Law Abiding Biker Store!
2016 Harley Dyna Low Rider S:
**Our Measurements (always measure yourself)
- Stock clutch cable= 60 inches
- Stock upper ABS Upper Brake Line= 23 inches
Additional Information:
- Stock 2016 Dyna Low Rider S handlebars/risers= 6 inch risers
- We installed 12 inch Westcoast MX T-bars
- We ordered +8 inches over stock cable/line length
- We installed 12 inch Westcoast MX T-bars
Where we ordered T-bars, cables, lines, & bushings from:
- Clutch cable, upper ABS brake line, & front ABS brake block
- Other options for front ABS brake block
- Arlen Ness Flush Mount Handlebar Riser Bolt And Bushing Kit For Harley
- Revzilla Affiliate Link: http://bit.ly/2lxuHPq
- Westcoast MX 12: T-bar handlebars
Join the Free Email Club!
If you appreciate this free information make sure to join the thousands of law abiding bikers that have already joined the free Email Club! You will be notified of new useful motorcycle content and techniques as we put them out. Join the Community now!
Hey guys any info on rokker classic racer boots like the look price is high but they look good billp-2199
Not yet, but always testing new gear!!
what about windshields have a 2016 flhxs thinking about klock werks 6.5 dark smoked see you have a tint on your bike good windshield? smoked or tint any help would be great thank you
Cory,
The windshield Ryan is running on his 2014 Street Glide Special is an 8.5” Klockwerks Flare-Tinted. Here is a direct affiliate link to that product. http://bit.ly/2dJBdk0
Ride Safe & Ride Often!
~Lurch
What are the manufacturing number of those magnum cable/lines? Also do you guys replace clutch cover gasket? And when do you think the video be up ?
The video has been up: https://gumroad.com/l/dynahandlebars
Yes, in the video we say to replace the side transmission cover gasket. Sroll down on this article/page ==> https://www.lawabidingbiker.com/harley-dyna-softail-sportster-handlebars/
and look for “parts and handlebars used” and you can see everything we used. Those are direct links.
If I install 10″ Risers, would I have enough stock cables or would I need to purchase aftermarket cables.
Thank you.
We show you how to figure all that out in our very detailed tutorial video. There is no hard fast rule. We’ll get you through it. Get the video, watch it, and then order your parts. –> https://gumroad.com/l/dynahandlebars
I’m about to do a handlebar install I’m very familiar with the work involved. However the ABS is what I have a question about. Do you have to replace the OEM ABS Block when changing cables? And if YES, why?
Thank you in advance
Anthony,
You will have to change out the block if you need a longer brake line between the brake block and the reservoir mounted on the handle bar. The OEM block is sealed. You need a new brake block to install a longer brake line on it so in can reach the handlebar reservoir.
Ride Safe & Ride Often!
~Lurch