Don’t Ignore This Critical Motorcycle Safety Check

There’s something most Harley-Davidson and Indian Motorcycle riders simply don’t check often enough—and it can absolutely become a serious safety issue.

We’re talking about your brake and clutch fluid.

Even experienced riders (myself included) have overlooked this at times. But here’s the truth: ignoring your brake fluid condition can lead to soft brakes, brake fade, or even complete brake failure.

And that’s not something you want to discover on the road.

SUPPORT US AND SHOP IN THE OFFICIAL LAW ABIDING BIKER STORE

Why Harley-Davidson Recommends Changing Brake Fluid Every 2 Years

Harley-Davidson recommends changing your brake fluid every two years regardless of mileage, and honestly, that’s solid advice for any motorcycle or car.

Why?

Because brake fluid naturally absorbs moisture from the air over time. It doesn’t matter if you ride a lot or your bike just sits—this process is always happening.

As that moisture builds up:

• The fluid’s chemical properties deteriorate
• The boiling point drops significantly
• Your braking performance becomes compromised

The Real Danger: Moisture Leads to Brake Fade

Here’s where it gets serious.

Water boils at 212°F, which is far lower than brake fluid. When moisture gets into your brake system and heats up during riding:

• That water boils
• It turns into gas
• Gas compresses much easier than liquid

• 

  CHECK OUT OUR HUNDREDS OF FREE HELPFUL VIDEOS ON OUR YOUTUBE CHANNEL AND SUBSCRIBE!

That’s when you’ll start noticing:

• Soft or spongy brake lever
• Reduced braking power
• Having to pump the brakes to build pressure

This is called brake fade—and in extreme situations, it can lead to complete brake failure.

LISTEN TO THE LAW ABIDING BIKER PODCAST!

This Applies to Both Brake AND Clutch Systems

Many riders don’t realize this:

On Harley-Davidson motorcycles, the hydraulic clutch system uses the same DOT brake fluid as your braking system.

That means:

👉 Your clutch fluid can degrade the exact same way
👉 And it needs to be checked and serviced just like your brakes

The Good News: You Can Easily Check It Yourself

You do NOT need to take your bike to a shop just to check your brake fluid condition.

There’s a simple, affordable tool that makes it incredibly easy:

✔ Brake Fluid Moisture Tester Pen

This is one of those tools every rider should own.

• Takes seconds to use
• Gives instant LED results
• Works on DOT 3, DOT 4, and DOT 5.1 fluids
• Tells you exactly when your fluid is unsafe

Using it is simple:

1. Remove your reservoir cap
2. Insert the probe into the fluid
3. Press the button
4. Read the result

If your fluid shows 3.7% moisture or higher, it’s time to flush your system.

No guessing. No excuses.

BECOME A PATRON MEMBER AND GET BENEFITS!

Flushing Your System Is Easier Than You Think

Once you know your fluid needs to be changed, the next step is flushing your system.

And this is where most riders hesitate…

But they shouldn’t.

✔ BikeMaster Pneumatic Brake Fluid Bleeder Vacuum Pump

This tool makes the job fast, clean, and ridiculously easy.

• Hooks up to a standard air compressor
• Pulls fluid through the system automatically
• Removes air and old fluid efficiently
• Eliminates messy, manual pumping methods

Instead of struggling the old-school way, this tool:

👉 Saves time
👉 Saves frustration
👉 Gets the job done right

Watch Our Free Step-by-Step Tutorial Videos

We don’t just sell the tools—we show you exactly how to use them.

When you visit these products in the Law Abiding Biker Store, scroll down and you’ll find two full, free tutorial videos:

• How to flush and bleed your Harley brake system
• How to flush and bleed your Harley hydraulic clutch system

These are detailed, step-by-step guides that show you:

• Exactly how to use the tools
• How to properly flush your system
• How to do it safely and confidently

After watching, you’ll realize:

👉 You don’t need a mechanic
👉 You can do this yourself

Don’t Get Burned by Cheap Knockoffs

Let’s talk about something important…

There are a ton of these tools on Amazon and eBay that look the same.

They’re not.

Many are:

• Poor quality
• Inaccurate
• Short-lived
• Total knockoffs

At the Law Abiding Biker Store, we:

• Personally test and vet our products
• Use them in our own shop
• Stand behind what we sell

When you buy from us, you know you’re getting:

✔ The right tool
✔ A quality product
✔ Something that actually works

Why This Matters More Than Anything

Brakes are the most important safety system on your motorcycle.

And unlike a car…

👉 You don’t have a backup plan on a bike

If your brakes fail, the consequences are immediate.

That’s why this isn’t just maintenance—it’s preventative safety.

Save Money. Ride Safer. Do It Yourself.

With just two affordable tools, you can:

• Check your brake fluid anytime
• Know exactly when service is needed
• Flush your system yourself
• Avoid expensive shop labor

And honestly…

There’s nothing better than wrenching on your own bike and knowing it’s done right.

Get the Tools in the Law Abiding Biker Store

Both of these must-have tools are available right now in the Law Abiding Biker Store:

• Brake Fluid Moisture Tester Pen
• BikeMaster Pneumatic Brake Fluid Bleeder

✔ Free shipping on orders over $100
✔ No tax for customers outside Washington State
✔ Bikers helping bikers

Final Thoughts

Don’t wait until your brakes feel soft or unsafe.

👉 Check your brake and clutch fluid regularly
👉 Use the right tools
👉 Stay ahead of problems

Because when it comes to your brakes…

You don’t get a second chance.